14
4. DMX-PROTOCOL
4.1 Function of the control channels
- 16 bit protocol
Channel 1 - Horizontal movement (Pan)
Push slider up in order to move head horizontally (PAN).
Gradual head adjustment from one end of the slider to the
other (0-255, 128-center). The head can be turned by 530°
and stopped at any position you wish.
Channel 2 - Vertical movement (Tilt)
Push slider up in order to move head vertically (TILT).
Gradual head adjustment from one end of the slider to the
other (0-255, 128-center). The head can be turned by 280°
and stopped at any position you wish.
Channel 3 - Pan fine 16 bit
Channel 4 - Tilt fine 16 bit
Channel 5 - Speed of PAN / TILT movement
Channel 6 - Switch on / off the lamp, reset, speed control of cooling fan
15
ENGLISH
Channel 7 - Colour-wheel 1
Linear colour change following the movement of the slider. In this way you can stop the colour-wheel in
any position - also between two colours creating double-coloured beams.
Between 128 and 190 and between 194 and 255, the colour-wheel rotates continuously the so-called
"Rainbow" effect.
Channel 8 - No function
Channel 9 - Prism -wheel
