Microframe Corporation
6
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 3500
Installation
The MultiPage Transmitter is designed to set on a flat surface or
wall mounted. It includes a removable mounting wedge. To
use the transmitter, simply plug the 12-volt DC power adapter
into the back of the transmitter and then plug the adapter into
the wall. The transmitter is now ready to use.
Operation
The MultiPage Transmitter has two primary operations. It can
be used to send numbers to both pager and Visual-Pager®
displays.
Sending Numbers to Visual-Pager® Displays
•
To send a number to a display, simply type the number that
you want to display, i.e. “1234” and then press [ENTER].
•
To delete a number from the display, press [CANCEL] then
type the number, i.e. “1234” then press [ENTER].
Paging Slimline Pagers
•
To send a page to a vibrating pager (i.e. pager #
4), type the pager number “4” then press [SEND].
•
You will then be prompted for the Beep Type. Slimline pagers accept any beep type - press [ENTER] to
accept the default.
•
Press [SEND]. If re-page is "ON," you will see the pager number re-paging on the bottom line. To stop the
re-page, press [CANCEL], type the number of the pager (e.g
. “4”) and then press [SEND].
Programmable Configurations
The MultiPage Transmitter has eight programmable options. To access these options press [SETUP] on the
keypad, then press the
“*” or “#” keys to move through the list of options. When you come to an option you would
like to change, press [ENTER]. Depending on the option, you can either press the
“*” and “#” keys to change the
value of the option, or you can type in the desired value. To return to the main options menu press [ENTER].
Once options are set, press [SEND] to save changes or [CANCEL] to discard changes. Each of the eight options
are described in detail below.
OPTION 1
– Transmitter Rollover Time
The “Rollover” Time is the amount of time that each number in the transmitter memory shows on the LCD screen
before rotating to the next number. For example, with the transmitter Rollover Time set to three seconds, and the
t
ransmitter with “123” and “456” in its memory, the transmitter will show “123” for three seconds and then show
“456” for three seconds and then back to “123.” To change the transmitter Rollover Time, simply use the “*“ and
“#” keys to select a time from 1 to 16 seconds. When the desired time is reached press [ENTER].
NOTE: The Transmitter Roll-Over Time is completely independent of the Display Roll-Over Time.
NOTE: For
“Hymn Mode”, set rollover time to 0. See below for details.
OPTION 2
– Auto Delete Time
The Auto Delete Time is the time that a number remains on the transmitter before it is automatically deleted. This
time can be set using the “*“ and “#” keys to select the desired value from 1 to 25 minutes. Once the desired
value is reached, press [ENTER] to return to the main menu.
NOTE: The Visual-Pager® Display has an independent Auto Delete Time which is set following the instructions in
the Visual-Pager® Display Section.
The factory default for the display Auto Delete time is 45 minutes. The reason for having an auto delete time in
both the display and the transmitter is best understood by the following example: At the end of the day, a user
may unplug the transmitter to turn it off. If there are numbers being shown on the display, they will remain on the
display until the display's auto delete removes them.
MultiPage Transmitter
