Microframe Corporation
4
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 3500
MultiPage System Overview
The
MultiPage System is a “plug and play” paging solution that consists of a transmitter and a display or pager.
The system may have more than one transmitter, and more than one display or pager, or any combination of
these items. With this system you may page vibrating pagers and/or send assigned numbers to a Wireless
Microframe Visual-Pager®.
•
MultiPage Transmitter
The MultiPage Transmitter is unique in that it can transmit to both Wireless Microframe Visual-Pager® displays
and vibrating pagers. The top line of the transmitter LCD screen shows the numbers being paged, while the
bottom line shows the pagers waiting to be re-paged.
To operate the system, simply plug the power adapter into the back of the MultiPage Transmitter and into a
power receptacle, and it is ready to use.
•
Wireless UHF Visual-Pager® Display
The Wireless UHF Visual-Pager® Display has been designed to receive signals from the MultiPage
Transmitter. The display is available in a 2-, 3-, 4-, or 6-digit model, each of which
has 5.5” tall red LED
numbers.
Numbers sent to the display will be saved and shown on both the transmitter and the display until manually
deleted or auto-deleted depending upon user preference.
To enter a number on the Visual-Pager® display, type the number on the transmitter keypad and press
[ENTER]. To remove numbers from the display, press [CANCEL] followed by the number(s), then press
[ENTER].
•
Vibrating Pagers
The MultiPage Transmitter can be used to send messages to vibrating pagers. The transmitter can re-page
these pagers at user-defined intervals. The transmitter will show on its screen the list of pagers being re-
paged.
To send a page to a vibrating pager, type the number of the pager you wish to page on the transmitter keypad
and press [SEND],
then follow the transmitter’s on-screen prompts. To remove numbers from the re-paging
queue, press [CANCEL], and type the pager number followed by [SEND].
System Components, Features, and Quick Operation
