background image

Limited Warranty Agreement

Your Microframe System is warranted against

failure due to defects in workmanship or mate-

rial for a period of one (1) year from the date of

purchase. Microframe Corporation will repair or

replace any defective unit. Obvious abuse or

mishandling of the unit is NOT covered by this

warranty.

Merchandise Return

If your Unit does not work satisfactorily,

please give us a call. We may be able to clear up

the problem by phone. If it becomes necessary

to return your Unit to the factory, please

observe the following:

1. Place Unit in a sturdy box with sufficient

packing material.

2. If requested, include the DC power adapter.

3. Return the system insured and prepaid

since we are not responsible for shipping dam-

ages and losses on returned Units.

Warranty Service

For warranty service, please contact

Microframe at 1-800-635-3811. A tech will gladly

assist you.

Assistance

For any product assistance or maintenance

help, contact Microframe by either calling 1-

800-635-3811 or emailing us at

[email protected].

Safety

Do not install substitute parts or perform

any modification to the product without first

contacting Microframe.

Warning

All power transformers, line cords, and elec-

trical equipment should be kept out of the reach

of children and away from water.

Life Support Policy

Microframe's products are not autho-

rized for use as components in life sup-

port devices or systems without the ex-

press written approval of the president of

Microframe Corporation. 

 As used herein:

1. Life support devices or systems are de-

fined as systems which support or sustain life,

and whose failure to perform when properly

used in accordance with instructions for use

provided in the labeling, can be reasonably

expected to result in a significant injury to the

user or anyone depending on the system.

2. A critical component is any component of

a life support device or system whose failure to

perform can be reasonably expected to cause

the failure of the life support device or system,

or to affect its safety or effectiveness.

Disclaimer

We are constantly striving to improve our

products. Due to this, specifications are subject

to change without notice.

Microframe Corporation
P.O. Box 1700
Broken Arrow, OK  74013
1-800-635-3811

Summary of Contents for 3061 Series














Reviews: