Microframe Corporation
Series 3061 - DataTrack Waiter Call
11
4.1 TURNING ON THE PAGER
Hold down the “LARGE GRAY BUTTON”
until the pager comes on.
4.2 RECEIVING A PAGE
The Pocket Pager will start to vibrate or tone
when it is paged. No action is necessary on the
receiving end at this point. The pager will stop
paging after approximately 8 seconds. If the user
would like to stop the page before the 8 seconds,
simply press the “LARGE GRAY BUTTON.” If a
numeric message is sent to the pager, the mes-
sage will be visible on the pager screen until the
pager stops vibrating. To view the message after
the pager has stopped vibrating, press the “LARGE
GRAY BUTTON” once.
4.3 MANUAL PAGER TURN-OFF
Press the “DOWN ARROW BUTTON” four
times. The words “PGR OFF” will appear on the
LCD screen. Press the “LARGE GRAY BUT-
TON” once to confirm.
NOTE: If you have
chosen to disable the pagers’ on/off button, the
pagers can only be turned off from the transmit-
ter.
4.4 POWER CHECKING
When the battery level is low, a low-battery
symbol will appear at the bottom of the pager
screen.
4.5 LIGHTING FUNCTION
Pressing the “UP ARROW BUTTON” for one
second can turn on the backlight on the LCD
screen. The light will shut off automatically after
approximately 10 seconds, or the user may turn
the light off manually by pressing the “UP
ARROW BUTTON” once.
4.6 CAUTION
a)
The pager is made up of LCD and
precision elements. Avoid water and
high temperature.
b)
Remove the battery if the pager will not
be in use for a long period of time.
c)
If the pager is not working properly, do
not dismantle or repair it yourself.
4 POCKET PAGER USER GUIDE
