Microdigital MDR-i0016(25/36), User Manual, Page: 49 / 64

49
10. When the format process is completed, assign this disk to storage space with referring to ‘3.3.1
Configuring DAS’.
Appendix3. Adding Directly Attached Storage Device Externally
This is to attach external storage device to Microdigital MDR-i0016(25/36). An interface card is to be
attached in to MDR-i0016(25/36)as below. Go to http://www.microdigital.co.kr/supported_devices for an up
to date list of supported cards.

It is not recommended to add interface card into MDR-
i0016(25/36), which avoids warranty. To add a new interface
card, please contact a dealer from which you bought the
MDR-i0016(25/36).

Make it is sure to turn off power and disconnect the power
cable from Microdigital MDR-i0016(25/36)before open the
cover plate.

It is necessary to format a newly attached disk before using.
Otherwise the disk cannot be added as storage space into
Microdigital MDR-i0016(25/36).

When you format the disk, make it sure to select the newly
attached disk to format; otherwise existing data shall lose the
archived data permanently when an existing disk is formatted.

Microdigital MDR-i0016(25/36)support various interface cards
including eSATA, SAS, and SCSI in ‘Low Profile’ form factor.