Microdigital MDR-i0016(25/36), User Manual, Page: 10 / 64

10
Chapter 2 System
2.1 Install MDR-i0016(25/36)and Start Up
In the following order:
①
Place MDR-i0016(25/36)on a secure level surface, or rack mount with included hardware
②
Plug in the USB key to one of the rear USB ports. (MDR-i0016(25/36)will not run without the USB
Key)
③
Plug in a monitor to the VGA port
④
Plug in the supplied PS2 Mouse and Keyboard (rear panel)
⑤
Connect an Ethernet cable to the network
⑥
Select power input type between 110V AC or 220V AC on the back
⑦
Connect a power code
⑧
Press power button on the front
During the boot process MDR-i0016(25/36)displays the Microdigital logo followed by the main screen.

MDR-i0016(25/36)requires
a monitor that supports 1024x768 or
higher resolution.

For North American Markets: Before connecting the power
cable to the unit, double check that the input power voltage is
set to 110V AC. Otherwise switch it from 230V to 110V