manualshive.com logo in svg

Microdigital MDR-i0016(25/36), User Manual, Page: 28 / 64

Share
Download
Microdigital MDR-i0016(25/36) User Manual Download Page 28

 

28

3.3.1 Configuring Internal Hard Drive 

 

 

 

 

 

 

After adding a new disk, it is necessary to assign the disk as storage device for MDR-i0016(25/36). 

Otherwise, MDR-i0016(25/36)does not use the attached but unassigned hard disk(s) as storage space.     

   

1.  Go to ‘Storage’ tab and click ‘Add/Edit’ button. 

 

 

Microdigital MDR-i0016(25/36)has an internal hard disk drive that is 
already configured to archive data. Therefore it is not necessary to 
configure storage for MDR-i0016(25/36)unless adding a disk into MDR-
i0016(25/36).   
 
For information on adding internal hard drive, external DAS system, 
NAS system or SAN system to MDR-i0016(25/36), please refer to the 
appendix.   

 

It is not recommended to add hard disk(s) inside MDR-i0016(25/36), 
which avoids warranty. To add more storage space to MDR-
i0016(25/36), please contact a dealer from which you bought the 
MDR-i0016(25/36). 

Summary of Contents for MDR-i0016(25/36)

































































Reviews:

No comments