http://www.microcyber.cn/en
~ 32 ~
Figure 5.67 Scale Factor Selection
2.
Enter the modified value, then click the apply button to save the modified value.
5.5.8.13
Range Upper Limit Register Address
1.
Select > drop-down box corresponding to "detailed design"-"sensor"->"range upper limit register
address", as shown in Figure 5.68
Figure 5.68 Address Selection of Range Upper Limit Register
2.
Enter the modified value, then click the apply button to save the modified value.
5.5.8.14
Range Lower limit register address
1.
Select the "detailed Design"->"Sensor"-> drop-down box corresponding to the"range lower limit register
address", as shown in Figure 5.69
Figure 5.69 Range Lower limit register address selection
2.
Enter the modified value, then click the apply button to save the modified value.
