http://www.microcyber.cn/en
~ 19 ~
are: PV value, current value, percentage and SV value, respectively.
Method to go to the refresh device tab:
(1) Left-click on an online device in the network view, and the right tab view displays the tabs associated
with the device.
(2) Click “variable Monitoring” in the right tab view, as shown in Figure 5.23.
Figure 5.23 Variable Monitoring tab
5.5 Gateway Parameter Setting
5.5.1
Mode selection
(1) Left-click on an online device in the network view, and the right tab view displays the tabs associated
with the device.
(2) Click on the "gateway configuration" in the right tab view. The first click to run this page requires reading
device information. The reading time is about 1 minute. After obtaining the information successfully, the
gateway configuration function is displayed, as shown in Figure 5.24.
