http://www.microcyber.cn/en
~ 21 ~
Figure 5.27 Read coil value input
3.
Then click the "OK" and the system prompts "read coil successfully ".
Figure 5.28 read coil success prompt
5.5.3
Register Calibration
Register read and write, the user can select "calibration "->" register" box, read and write separate registers.
Example: Read the value of a register
1.
Click the "Calibration "->" Register "->" read hold register" to pop up the "register" window, as shown in
Figure 5.29:
Figure 5.29 Read register input
2.
Enter register address and length value, please note that the range of register address is from 1~65536.
Figure 5.30 Read register value input
3.
Click "ok"and the system prompts "read hold register success ".
5.5.4
Factory reset setting
5.5.4.1
Reset to Factory Default
1.
Click the "Calibration "->" restore factory settings "->" restore to factory default settings", pop up
"restore factory settings" window, as shown in Figure 5.31:
