http://www.microcyber.cn/en
~ 24 ~
Figure 5.39 Reset to factory settings prompt
5.5.4.4
Device variable assignment
Setting dynamic variable parameter assignment is to set the mapping relationship between device variable and
dynamic variable. There are 6 device variables in the device, which can be mapped to 4 dynamic variables
according to demand.
For example: map the main variable to device variable 4.
1.
Select the "detailed design"->"device variable assignment"->"device variable assignment" corresponding
to the "main variable" drop-down box, as shown in Figure 5.40:
Figure 5.40 Selection of device variables
2.
In the dialog box, select Device Variable 4, as shown in Figure 5.41:
Figure 5.41 Modification of device variables
3.
Click the “apply” to save the settings. As shown in Figure 5.42
