Microchip Technology MPLAB ICE, User Manual

Page: 66 / 192

MPLAB
®
ICE User’s Guide
DS51159B-page 66

2001 Microchip Technology Inc.
The only file listed in the Project Files section of this dialog is
icetut18
[.hex]
, which will become the output file.
Next to the Project Files section are a group of buttons, one of which, the Add
Node Button, is active. Click on it now to open the Add Node dialog.
Figure 3.7: Add Node Dialog
Find the ASM file you copied into the project directory and click on its name to
select it. If you could not file this file, or if it was missing, type
icetut18.asm
in the File name box of the dialog.
Click OK to close this dialog and return to the Edit Project dialog.
Note: If you are using a version of MPLAB IDE that has not been recently
installed, (i.e., the default configurations may have been changed),
you will need to:
• click on the Hex file to activate the Node Properties button
• click on this button to open the Node Properties dialog
• select MPASM as the Language Tool in this dialog
• click OK to close this dialog and return to the Edit Project dialog