Microchip Technology MPLAB ICE, User Manual

Page: 104 / 192

MPLAB
®
ICE User’s Guide
DS51159B-page 104

2001 Microchip Technology Inc.
6.3.3.2 Data Memory
If a Data Memory access is specified, the trigger can be set on a read or a
write operation to file registers or special function registers. This is called data
monitoring.
Figure 6.3: Complex Trigger - Data Memory Selection
6.3.4 Event Selection
Up to four events can be required before the trace or break occurs. The
combination of these events can be specified three ways:
• Sequential
• All Events
• Any Event
In addition, the complex triggering feature along with the trace memory
window can be used to perform the following functions:
• Time Between Events
• Filter Trace
Note: Processor modules that do not support data monitoring (12-bit core
processor modules) also do not support triggering on data mem-
ory.