Microchip Technology MPLAB ICE, User Manual

Page: 132 / 192

MPLAB
®
ICE User’s Guide
DS51159B-page 132

2001 Microchip Technology Inc.
Click OK to close and save your changes. Click Cancel to close without
making changes. Click Help for on-line help information.
7.3.4 Working with and Exiting Verify
Once you have closed either Verify dialog, you may re-open them using
options on the Tool menu:
• Verify MPLAB ICE – Opens the Verify MPLAB ICE dialog
• Port/Mode select – Opens the Port Selection dialog
When you have finished verifying, exit the program by one of the following
methods:
• Select File > Exit
• Use keystrokes Alt-F-X or Alt-F4
• Select Close from the system menu button (top left corner of the win-
dow)
• Click on the "X" in the top right corner of the window
7.4 Troubleshooting Verify Failures
If your MPLAB ICE unit reports failures when running Verify, please check the
following items:
• Confirm that the MPLAB ICE unit is powered up and properly
communicating with your PC. To determine this, select Tools > MPLAB
ICE Configuration..., then choose Inquire from the MPLAB ICE System
tab in this dialog. To resolve communication problems, please see
Chapter 8 Troubleshooting.
• Confirm that a processor module is properly inserted into the MPLAB
ICE unit. (The Error light should not be lit). Also, make sure that the pro-
cessor module isn't connected to a target board.
• Confirm that the processor module is correctly configured for a valid
processor. See Chapter 4 for information on how to configure your
processor module.
If you have checked all of the above items and still believe that your MPLAB
ICE system may not be operating correctly, please follow the guidelines in
General Information for obtaining customer support to get your unit repaired
or replaced.