Microchip Technology MPLAB ICE, User Manual

Page: 131 / 192


2001 Microchip Technology Inc. DS51159B-page 131
Verification
7.3.3 Using the Port Selection Dialog
On closing the Verify dialog, the Port Selection dialog will open. This dialog
may be opened from Tools > Port/Mode select as well.
There are two tabs on this dialog:
• Ports – Set the LPT port for communications with MPLAB ICE
(Figure 7.5).
• Tools – Set the tool to verify (Figure 7.6).
Figure 7.5: Port Selection Dialog - Ports Tab
Figure 7.6: Port Selection Dialog - Tools Tab
If you are having trouble verifying MPLAB ICE, you may wish to set up your
port differently using the Ports tab. If you are having communications
problems with MPLAB ICE, please refer to Chapter 8 Troubleshooting.
To select tools that may be verified (only MPLAB ICE available), use the
Tools tab. You may check device limitations from this tab by clicking Details.