Microchip Technology MPLAB ICE, User Manual

Page: 128 / 192

MPLAB
®
ICE User’s Guide
DS51159B-page 128

2001 Microchip Technology Inc.
First, you will be warned that Verify could damage other devices if they are on
the port to be verified. Make certain that you are not using MPLAB ICE with a
switchbox or a pass-through and that you have selected the correct parallel
port for the MPLAB ICE device.
Click OK to continue. Click Cancel to check your connections before
verifying, and then select Tools > Verify MPLAB ICE.
7.3.2 Using the Verify Dialog
The Verify dialog will now appear. There are three tabs on this dialog:
• Access tests – Checks basic access to and static functionality of the
system (Figure 7.2).
• Run mode tests – Checks the running of the system (Figure 7.3).
• Version – Shows MPLAB ICE configuration information (Figure 7.4).
Figure 7.2: Verify MPLAB ICE – Access Tests
Note: If you use MPLAB ICE on a dedicated port and do not wish to see
this message every time, select the checkbox for "Disable this
warning message."