manualshive.com logo in svg

Microchip Technology ATBTLC1000 Series, User Manual, Page: 55 / 84

Share
Download
Microchip Technology ATBTLC1000 Series User Manual Download Page 55

4.

The user can trigger a missed call to the Android device or send an SMS. The corresponding notification then
gets displayed on the device side in the console logs.

Figure 5-50. Console Display for Missed Call Alert and SMS Alert Notifications

5.3.18 

Multi-Role Peripheral Multi-Connect Application

Perform the following steps to run the Multi-Role Peripheral Multi-Connect application demo:

1.

Establish the connection between the device and mobile phone using the procedure listed in 

Running the

Demo

. The device initially acts as a GAP Peripheral and starts advertisement with Battery Service UUID in the

advertisement data. Perform all the steps from 

Battery Service Application

.

2.

The device starts scanning and displays the devices found, as shown in the following figure.

Figure 5-51. Multi-Role Peripheral Multi-Connect Application – Scanning Devices

3.

Setup another ATBTLC1000-MR/ZR device with the Find Me application example loaded. Follow the steps (1
through 3) from 

Running the Demo

. The device starts advertising.

4.

The GAP Central (Find Me Locator) scans and then displays the list of all BLE devices that are advertising.
Find Me Target devices (GATT server role) are indicated with tag “---FMP”. Select the appropriate index
number for the Find Me Target. GAP Central (Find Me Locator) connects to the selected peer device.

 ATBTLC1000

Application Demo

©

 2019 Microchip Technology Inc.

 User Guide

DS50002640B-page 55

Summary of Contents for ATBTLC1000 Series





















































































Reviews:

No comments