...........continued
Applications (Keywords)
BLE Node 1
BLE Node 2
Health Thermometer Profile (HTP)
Application
Supported by the Microchip
SmartConnect application for iPhone/
Android devices to act as a Health
Thermometer Collector
Supported by the ATBTLC1000-
MR/ZR extension board and
microcontroller to act as HTP
application
iBeacon Application
Supported by the Microchip
SmartConnect application for iPhone/
Android devices to act as Beacon
Monitor
Supported by the ATBTLC1000-
MR/ZR extension board and
microcontroller to act as Beacon
Reporter
AltBeacon Application
Supported by the Microchip
SmartConnect application for iPhone/
Android devices act as a AltBeacon
App (Monitor)
Supported by the ATBTLC1000-
MR/ZR extension board and
microcontroller to act as Reporter
Eddystone Beacon Application
Supported by the Microchip
SmartConnect application for iPhone/
Android devices
Supported by the ATBTLC1000-
MR/ZR extension board and
microcontroller to act as Eddystone
Beacon Application
Direct Test Mode (DTM)
Application
Supported by the ATBTLC1000-MR/ZR
extension board and microcontroller to
act as a Transmitter (Tx) Test Board.
BLE performance analyzer tool
connected with target board using COM
port
Supported by the ATBTLC1000-
MR/ZR extension board and
microcontroller to act as a Receiver
(Rx) Test Board. BLE performance
analyzer tool connected with target
board using COM port
5.2
Console Logging
For the purpose of debugging, a logging interface can be implemented in the applications.
The logging interface utilizes the same EDBG port that connects to a supported Xplained Pro (XPro) platform. A
serial port monitor application (for example, TeraTerm) is opened and attached to the appropriate COM port
enumerated by the device on the PC.
5.3
Running the Demo
Initializing the Device
Perform the following steps to initialize the device:
1.
Open any Terminal Application (for example, TeraTerm). Select the COM port enumerated on the PC and set
the following parameters:
– Baudrate 115200
– Parity None
– One Stop bit
– One Start bit
– No Hardware Handshake
2.
Press the Reset button on the supported Xplained Pro (XPro) platforms (see
).
Note:
The device is now ready to be used as selected application and starts to scan or advertise on the
button press. This button must be pressed only when the “Press button” is displayed on the console log
window. The same button is pressed to stop the device scan or advertise.
3.
The device is in advertising mode and the device initialization message is displayed on the console window.
Initializing Application
BTLC1000 XPro Module: BTLC1000-ZR
ATBTLC1000
Application Demo
©
2019 Microchip Technology Inc.
User Guide
DS50002640B-page 30