Microchip Technology ATBTLC1000 Series, User Manual, Page: 53 / 84

Share

Page: 53 / 84

Microchip Technology ATBTLC1000 Series User Manual Download Page 53

4.

On the device side, the console log is displayed as:

Find Me : Mild Alert

Find Me : High Alert

Find Me : No Alert

5.3.16

Phone Alert Status Application

Perform the following steps to run the Phone Alert Status application demo:

1.

Establish the connection between the device and mobile phone using the procedure listed in

.

2.

After connection, the application displays the Phone Alert Status Service page.

3.

Notifications are automatically enabled and the application reads the values of the “Alert Status”, “Ringer
Settings”, and “Ringer Control Point” characteristics, which are updated on the mobile application, as
illustrated in the following figure.

Figure 5-46. Displaying the Characteristics of the Phone Alert Service

4.

Press the SW0 button. The device is set to different modes by using the notifications and the corresponding
console logs are displayed.

Figure 5-47. Phone Alert Status Console Log

ATBTLC1000

Application Demo

©

2019 Microchip Technology Inc.

User Guide

DS50002640B-page 53

«
...
51
52
53
54
55
...
»

Summary of Contents for ATBTLC1000 Series





















































































Reviews:

No comments