10-Pin MSOP and 8-Pin MSOP Evaluation Board User’s Guide
DS50002569A-page 14
2017 Microchip Technology Inc.
2.2
GETTING STARTED
The pins of the 8-pin device are tied together with the upper pins of the 10-pin device
(1-4 and 7-10); see
The pads’ indexes correspond to the MSOP-10 pin indexes. For example, pad P05 is
connected to the pin 5 of the MSOP-10 package.
The footprints for the pull-up (RUx), pull-down (RDx) and series (RSx) devices are
labeled in relation to the MSOP-10 package. For example, pin 1 is connected to RU1,
RD1 and RS1.
This circuit allows each pin to individually have any of the following: a pull-up resistor,
a pull-down resistor (or a loading/filtering capacitor) and a series resistor.
Power supply filtering capacitors are connected between the V
DD
and V
SS
pads (C1
and C2). The circuit has two 6-pin headers that can be used for PICkit Serial commu-
nication as well as PIC ICSP, or to connect two evaluation board together. The signals
of the headers need to be jumpered to the appropriate device pins.
TABLE 2-1:
MSOP FOOTPRINTS PIN CORRESPONDENCE
MSOP
—
10
MSOP
—
8
Comments
1
1
2
2
3
3
4
4
5
—
6
—
7
5
8
6
9
7
10
8
