MicroBoards Technology PF3-1000 Page 10 User Manual Download | Manualshive

Page: 10 / 23

background image

•

Assembly and Installation

10

PF-3 Print Factory Installation

The PF-3 Print Factory installation disk includes an Installer that will walk you

through the process step by step. Please use the Installer and follow the

installation steps in order.

The following installation sections are intended only as a reference for the installation process, not as
a guide to installing the PF-3 Print Factory. Performing the installation out of order could result in an
unsuccessful installation.

The PF-3 Print Factory Installation Quick Reference Guide will show you the order in which the
installation will occur.

Installation should always be done when logged in as a user with full Administrator rights.

Connecting to a PC

DO NOT CONNECT YOUR PF-3 PRINT FACTORY TO A COMPUTER BEFORE

RUNNING THE INSTALLER LOCATED ON THE INSTALLATION DISK!!

The connection between the PC and the Microboards PF-3 Print Factory is done with one USB cable.

1. Confirm that the AC power cord to the back of the PF-3 Print Factory is connected and that the

switch in the back is ON.

2. Confirm that your PC is powered on.

3. Connect the square shaped end of the USB cable to the back of the PF-3 Print Factory.

4. Connect the flat, rectangular end of the USB cable into a USB 2.0 port in

your PC.

«
...
8
9
10
11
12
...
»

Summary of Contents for PF3-1000
























Reviews:

No comments

Related manuals for PF3-1000

Brand: StarTech.com Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands