CopyWriter Hard Drive Duplicator Series
11
Removing the Drive Trays
To correctly remove the drive trays from the Hard Drive Duplicator, follow these steps:
1. With power on to the duplicator, verify that the individual Drive Bays are not powered on. The
LEDs on the hard drive power buttons will be off for each unpowered drive bay.
You should never remove or insert a drive into a drive bay with that bay powered on!
2. Remove the Hard Drive Tray from the system by performing the following steps:
a. Press the Tray Button to release the
latch.
If you cannot release the latch by press
the Tray Button, check the lock knob and
move it to the unlocked position if
necessary.
b. Pull the tray latch out.
c. Pull the tray straight out of the drive bay.
3. Remove the drives from the trays by lifting
them straight up.