micro-trak FLOWTRAK II, Reference Manual

Page: 15 / 44

15
The “Control” output will drive a load of up to .5 ampere
maximum. For higher currents, either order a Relay Kit, P/N
17200 (15 amp maximum output) or purchase a suitable
relay (maximum .5 amp coil current) and connect to the
CONTROL output as shown in the Illustrations below.
FlowTrak-II Layout
RELAY CONNECTION (USER-SUPPLIED RELAY)
CONTROL
+12 VDC (NOMINAL)
MOTOR OR
SOLENOID
RELAY OR VALVE
NOT SUPPLIED
COIL = 5 AMP MAX
BLACK
RED
2-PIN M/P
EXT CABLE
GND
+VES
YELLOW TIE
GREEN TIE
RUN/HOLD
BLACK TIE
GRAY TIE
RED
BLACK
SPEED
FLOW
FlowTrak-II Layout
OPTIONAL RELAY KIT ON CONTROL OUTPUT
BLACK TIE
BLACK
P/N 17200
OPTIONAL RELAY
CONTROL
RED
+VES
GND
RUN/HOLD
GRAY TIE
YELLOW TIE
GREEN TIE
FLOW
SPEED
+12 VDC (V IN)
(NOMINAL)
MOTOR OR VALVE
(V OUT)
(15 AMP MAX)
GROUND
ORANGE
BLUE
Installation
(cont)
Connecting the Control Output