MICRO-EPSILON thermoMETER CTVideo, Instruction Manual

Page: 34 / 64

Page 34
Operation
thermoMETER CTVideo
9. Operation
After power up the unit the sensor starts an initializing routine for some seconds. During this time the display
will show
INIT
. After this procedure the object temperature is shown in the display. The display backlight
color changes according to the alarm settings, see Chap. 8.4 .
9.1 Restoring Factory Setting
To set the thermoMETER CTVideo back to the factory default settings, please press at first the button
and then the button and keep both pressed for approx. 3 seconds.
The display will show
RESET
for confirmation.
Display Modus (Example) Adjustment Range
S ON Laser Sighting (On) ON/OFF
142.3C Object temperature (after signal processing)
(142.3 °C) Fixed
127CH Sensor temperature (127 °C) Fixed
25CB Box temperature (25 °C) Fixed
142CA Actual object temperature (142 °C) Fixed
MV5
Signal output channel 1 (0 - 5 V)
0 - 20 = 0 - 20 mA/
4 - 20 = 4 - 20 mA/
MV5 = 0 - 5 V/
MV10 = 0 - 10 V/
TCJ = Thermo couple type J/
TCK = Thermo couple type K
E0.970 Emissivity (0,970) 0,100 ... 1,100
T1.000 Transmissivity (1,000) 0,100 ... 1,100
A 0.2 Signal output Average (0.2 s) A---- = inactive/0,1 ... 999,9 s
P---- Signal output Peak hold (inactive) P---- = inactive/0,1 ... 999,9 s/P ∞ ∞ ∞ ∞ =
infinite