Page 76
Appendix | Software
induSENSOR DTD / MSC7xxx
Sensor setup
Sensor model
1 - 6: DTA-xD oder 7 - 10: DTA-xG8
127: user defined DTA
129 - 131, 133: LDR-x
132: LVP-25
255: user defined LDR
0: unknown sensor
Automatic recognition of sensor model
Excitation frequency
(Hz)
1000 / 2000 / 5000 / 8000 / 9000 / 10000 /
12000 / 13000 / 16000 / 18000 / 21000 / 23000 /
25000
Only with
user-defined
sensor setting
Excitation voltage (mV)
550 / 350 / 150 / 75
Three options for sensor configuration:
- Automatic sensor recognition
- Model setting
- User-specific sensor setting
i
Please note that automatic sensor recognition is merely a support feature. Successful recognition can-
not be guaranteed on account of tolerances. As such, the recognition result must always be checked.
Sensor recognition
After switching on, the controller automatically identifies the sensor.
After successful recognition, the sensor model, the associated excitation frequency and the excitation voltage
are automatically set.
Check the values based on the operating instructions
.
If the values are not correct, carry out the automatic sensor recognition manually or select the sensor model
in the drop down menu.
i
If the sensor model is not listed in the drop down menu, please contact Micro-Epsilon.
Please note that changing the sensor model overwrites all manually set parameters.
Fields with gray
background re-
quire a selection.
Fields with dark
border require
entry of a value.
