Page 59
Operation
induSENSOR DTD / MSC7xxx
5.4.4
Example B: Signal Output Adjustment: 2 ... 10 V, Channel 1
D1
D2
D3
D4
G
MENU
Press the
MENU
button for 3 seconds, if you are not yet in the menu.
G
R
G
Output situation: The sensor parameters are already set; depending on the approach, LED
D4
is
green or switched off.
G
O
G
Menu point:
Signal
; in delivery state, the electronics works with automatic load recogni-
tion; depending on the output load, the LED D4 is red (4 ... 20 mA) or orange
(2 ... 10 V). If the automatic settings suits you, you can cancel example B here.
ENTER
Confirm by pressing the
ENTER
button.
G
O
G
G
O
O
Voltage output
ENTER
Confirm by pressing the
ENTER
button.
G
O
O
O
2 ... 10 V; with
the selection can be changed here.
ENTER
Confirm by pressing the
ENTER
button.
G
R
G
Output situation: The sensor parameters are already set; depending on the approach, LED D4 is
green or switched off.
