MICRO-EPSILON CSE05 Operating Instructions Manual Download Page 37

Page: 37 / 42

Seite 37

Maintenance

capaNCDT 61xx/IP

Maintenance

Make sure that the sensor surface is always clean.

Switch off the power supply before cleaning.
Clean with a clamp cloth; then rub the sensor surface dry.

Disconnect the power supply before touching the sensor surface.

> Static discharge

> Danger of injury

If the controller, the sensor or the sensor cable is

defective, please send us the effected parts for

repair or exchange. In the case of faults the cause

of which is not clearly identifiable, send the whole

measuring system back to

MICRO-EPSILON MESSTECHNIK

GmbH & Co. KG

Königbacher Str. 15

94496 Ortenburg / Germany

Tel. +49 (0) 8542 / 168-0

Fax +49 (0) 8542 / 168-90

[email protected]

www.micro-epsilon.com

Sensors of the same type can be replaced without calibrating the controller.

Summary of Contents for CSE05











































Search results

Summary of Contents for CSE05

Reviews:

Related manuals for CSE05

Brands by name

Popular brands

MICRO-EPSILON CSE05, Operating Instructions Manual

Search results

Summary of Contents for CSE05

Reviews:

Related manuals for CSE05

Brands by name

Popular brands