XZR250 User’s Manual
34
97528
Issue 5, May 2019
REPLACING PARTS
!
CAUTION: Do NOT pull forcefully.
4. Disconnect the ribbon cable from the old panel and connect to the new front panel.
5. Re-fit the front panel (1) to the housing and secure in place using the four screws.
6. Re-fit the two screw covers (2).
9.5
Disposal
The device contains both electrical and mechanical components. For this reason, the
sensor head should be removed and disposed of as electrical waste.
NOTE:
The sensor block can be returned to the manufacturer for recycling.
