XZR250 User’s Manual
4
97528
Issue 5, May 2019
INSTALLATION
!
CAUTION: Make sure the shielding is intact and correctly
positioned to ensure the device is grounded properly as shown
below.
Figure 3
Cable Shielding
5. Using a 20mm spanner, tighten the cable gland to secure the cable in place.
NOTE:
Be careful not to over-tension the wires or over-tighten the gland.
6. Reconnect the ribbon cable to the front panel (1).
7. Re-fit the front panel (1) to the housing and secure in place using the four screws.
8. Fit the two screw covers (2).
!
CAUTION: Do NOT force the module otherwise you may damage
the terminals or other components within the housing.
