- 23 -
What to do if graph function is not working
This is the most encountered problem with this software. To make the graph function working properly,
please check the following step:
1, find the folder where the “EasyWeahter.exe” file is located
2. Create a file name “reg_graph.bat” file with wordpad or notepad editor program
3. type “regsvr32 easyweather.ocx” and save the reg_graph.bat file
4. Double click “reg_graph.bat” file and it should register the graphic driver again. If successful,
then the following window will be displayed:
Special Notes about time synchronization between PC and sub-station:
The PC software obtained its own time scale through the time interval marker from the base station
history data, and the PC software automatically synchronizes the weather data with a time stamp
calculated. Thus the history data file can have different time when the PC time and base station time is
not same. In order to make the time scale correct, remember to set the PC time and base station time
same, and further to this, no weather data is allowed to be missed or over-written. If history weather
memory on the base station is cleared by manual setting, then the history weather data since last
uploading is lost permanently.
Before memory is used up(memory icon on LCD display showing 100% full), remember to upload
weather history data to PC periodically.
If there is a reset happened for the rain fall on the base station, then there will be rain fall value
discrepancy between PC and base station.
Legal Notes
•
We reserve the right to delete or change any image whether or not purposely uploaded onto
the server by a user of the EasyWeather software products.
