- 12 -
of a PC. Also the settings of the storing intervals from 5 minutes to 240 minutes for the storage of
data sets can only be performed by means of a PC.
Connections and Software
The wiring between Weather Station and PC takes place by means of an included USB cable.
The EasyWeather software package, also included in the shipping contents, must be installed on
the PC.
This software allows the display of all present weather data with graphic symbols. It also allows
the display, storage, and printing of history data sets, whose volume exceeding the maximum
4080 data sets of the Weather Station is only limited by the capacity of the PC’s main memory.
PC software installation
The installation of software is very simple: double click the setup.exe file and follow the steps
popped up.
Make sure you are running the program under the administrator accounts of your windows PC
platform. Otherwise the graphic function might not be working when graph display mode is
needed to display all history data.
If you run the program for the first time, the current weather display will be displayed and at the
sub line of the window, the program will show related information regarding the read of all history
data into the PC. Please note however, when there is large amount of data is being uploaded, it
will take a few minutes time before the system can respond to your setup settings. Otherwise it
will display “read weather data fail” error message since the USB port is reading the data from
the memory and the system is not able to respond any further job tasks.
