Mhouse RT3N, Installation And Use Instructions And Warnings

Page: 15 / 136

English – 13
EN
B Power the receiver and wait for the initial
beeps
Ë
1
• With the transmitter in mode I or not
memorized:
Press and hold down key
n
(or 2) of the transmitter until you hear a
beep (after about 5 seconds) then release
it.
• With the transmitter in mode II: Press
and release the memorized key.
If the motor should start moving, press
the key again and hold it down until you
hear a beep (after about 5 seconds), then
release it
2 After 1 second, press the
s
key and
release it precisely during the third beep
3 After 1 second, press the
n
key and
release it precisely during the third beep
4 After 1 second, press the
t
key and
release it precisely during the third beep
5 If you wish to completely erase all the data
stored in the memory, press keys
s
and
t
simultaneously within 2 seconds and
then release it
After a few seconds, 5 beeps will signal
that the memory has been cleared
Ë
Ë
5s
?... 5s