Mhouse RT3N, Installation And Use Instructions And Warnings

Page: 9 / 136

English – 7
EN
memorized for two commands to the same receiver, or to command different
receivers as illustrated in the example below:
Group commands can be created using special memorisation processes, as
shown in figure 14:
• T1 memorised in Mode I both on A1 and A2 will enable the user to control
ascent, stop or descent simultaneously, both for A1 and A2.
• T2 memorised in Mode I on A3 only, makes it possible to control ascent,
stop or descent.
Table [C] Commands available for memorization Mode II
No. Command Description
1
Step-By-Step The first command activates the ascent; whilst
the motor is actually moving, the second will
control the stop; the third controls descent,
and so on
2
Ascent-Stop The first command activates the ascent; whilst
the motor is actually moving, the second will
control the stop
3
Descent-Stop The first command activates the descent;
whilst the motor is actually moving, the second
will control the stop
4 Stop Activates the stop, and only the stop
Example of memorization in Mode II
Key 1 Awning
No. 1 Ascent
Key 2 Awning
No. 1 Descent
Key 3 Rolling shutter No.
1 Step-By-Step
Key 4 Rolling shutter No.
2 Step-By-Step