FCC SAFETY
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause Harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
WARNING: Changes or modification to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules.
This limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and radiate radio frequency energy
and, if not installed and used in accordance with the instruction, may cause harmful
interference to radio communication. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on,
the user in encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
is connected.
• Consult the dealer or an experienced radio /TV technician for help.
• For optimum control of your power tool, always use the auxiliary handles if that come
with the tool.
• Your tool has insulated gripping surfaces - be sure to hold the power tool by these
surfaces to avoid electrical shock if the cutting part of the tool should make contact
with a "live" wire.
• For best safety measures, lay the tool on it is side when not in use, particularly if you're
If tools with large battery packs
can stand upright, but they're easily tipped over, which could cause result in an injury.
• Power tools exert extreme force - be sure the item you are working on is firmly secured
with clamps or other reliable means.
Do not try to hold the item by hand or against your
body - you might lose control and be injured.
• Keep hair, clothing or gloves away from air vents, as they may become entangled in
the moving mechanism around these areas.
• Hold the tool firmly with both hands. Use the auxiliary handle if avail-able; if there is no
auxiliary handle, grip the handle at the bottom.
Losing control of the device can result in
personal injury.
SPECIFIC SAFETY RULES
• Exposure to loud noise can cause hearing damage.
Always wear ear a protection when
using power equipment.
WARNING: ALWAYS use safety glasses.
Everyday eye glasses are NOT safety glasses.
• Use face or dust mask if operation is dusty.
ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3)
• ANSI SI 2.6 (S3.19) hearing protection
• NIOSH/OSHA respiratory protection
STAY ALERT
Watch what you are doing and use common sense. Don't operate any tool when you are
tired.
WARNING: Some dust created when using power tools to sand, grind, drill or saw
and/or other construction activities contains chemicals known to the State of California
to cause cancer, birth defects or other reproductive harm. Some examples of these types
of chemicals:
• Lead from lead-based paint
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies depending on how often you do work that involves
these materials.
To reduce exposure risk, work in a well ventilated area with approved safety equipment like
dust masks that are designed to filter out microscopic particles.
•
Avoid prolonged contact with dust from construction activities like power sanding,
sawing, grinding, and drilling. Always wear protective clothing and immediately wash
any exposed areas with soap and water.
If you allow dust to get into your eyes or mouth, or stay on your skin, you risk absorption of
these harmful chemicals.
WARNING: Dust from use of this tool on construction material may cause serious
and/or permanent respiratory (or other) injury.
Direct the particles away from your face,
and be sure to use NIOSH/OSHA approved respiratory protection against dust exposure.
10
11
25. The battery Charger gets hot during use. The Charger’s heat can build up to unsafe
levels and create a fire hazard if it does not receive adequate ventilation, due to an
electrical fault, or if it is used in a hot environment. Do not place the Charger on a flamma-
ble surface. Do not obstruct any vents on the Charger. Especially avoid placing the
charger on carpets and rugs; they are not only flammable, but they also obstruct vents
under the charger. Place the Charger on a stable, solid, nonflammable surface (such as a
stable metal workbench or concrete floor) at least 1 foot away from all flammable objects,
such as drapes or walls. Keep a fire extinguisher and a smoke detector in the area.
Frequently monitor the Charger and Battery Pack while charging.
26. This product is not a toy. Keep it out of reach of children.
27. People with pacemakers should consult their physician(s) before use. Electromagnetic
fields in close proximity to heart pacemaker could cause pacemaker interference or
pacemaker failure.
20V ULTRA 6-1/2in Circular Saw 2Ah KIT
(MH-03-CS-B1-0-1)
20V ULTRA 6-1/2in Circular Saw 2Ah KIT
(MH-03-CS-B1-0-1)
