background image

10

4.0 Battery Charging & Connection

The MGI Zip Navigator All Terrain can only be used with the:

•  MGI 24v 380Wh Lithium battery

4.1 Initial Charge

•  Before using your MGI Zip Navigator AT for the first time you  
 

must fully charge the battery overnight.

•  Plug the charger AC lead into a power point - the green LED  
 

illuminates to indicate the charger is on.

•  Plug the charger output connection into the connector on  
 

the front of the battery - the red LED illuminates to indicate it is  

 charging.
•  When the charging LED indicator has turned green, the  
 

battery is fully charged and ready for use.

Please refer to the battery charger user manual for further 
information.

4.2 Connecting the Battery onto the Zip Navigator AT

Position the battery on the Zip Navigator AT and push the battery 
down to secure it.

Push the handle down to connect the battery to the  
Zip Navigator AT.

Your Zip Navigator AT has been equipped with a fail safe battery 
connection, so the Zip Navigator AT will not move when you 
connect the battery. Your Zip Navigator AT will only start once the 
speed control is switched on.

4.3 Charging the Battery after use

•  Disconnect the battery by lifting the handle.
•  The battery can be left on or removed from the  
 

Zip Navigator AT for charging.

•  Plug the charger AC lead into a power point - the green LED  
 

illuminates to indicate the charger is on.

•  Plug the charger output connection into the connector  
 

on the front of the battery - the red LED illuminates to indicate  

 charging.
•  When the charging LED indicator has turned green, the  
 

battery is fully charged and ready for use.

5.0 Fitting a Golf Bag

Ensure that the top bag support straps are disconnected.
Position the golf bag on the Zip Navigator AT.
Secure the top bag support strap
•  Select a good position for the elasticised straps to be put  
 

around the golf bag.

•  Stretch the longer end of the strap and loop the rounded  
 

plastic bar underneath the hook on the shorter end.

•  The top bag support straps should now be connected.

Please ensure the top bag support straps are hooked in place 
securely before releasing. Failure to do so could result in injury to 
the user.

Adjusting the length of the top bag support strap

The rounded plastic bar on the longer strap can be adjusted to 
ensure the bag is securely in place.

Secure the lower bag strap and pull the lower bag strap over the 
base of the golf bag.

 

MGI Zip Navigator All Terrain 

User Manual

 

11

Summary of Contents for Zip Navigator AT














Reviews:

Related manuals for Zip Navigator AT