MGI Zip Navigator AT, User Manual, Page: 10 / 13

18
9.2 Warranty Exclusions
The following events will void warranty:
• Any alteration performed by non-authorised people
or companies.
• Fitting of parts or accessories not recommended by MGI.
• Any damage caused by continued operation of the
Zip Navigator AT after it is known to be defective.
• Damage to seat and/or seat support bracket.
• Damage caused by ingress of water into motor/gearbox
and other major components.
• Damage caused by the Zip Navigator AT going into bunkers
and other course hazards.
• All implied warranties [save those preserved by statute] are
excluded. Liability for consequential damages under any and
all warranties are excluded to the extent exclusion is permitted
by law.
9.3 Parts Installed During Warranty
Warranty coverage for components installed during a motorised
Zip Navigator AT’s warranty period shall consist of the duration
of the Zip Navigator AT’s warranty period, provided the warranty
installation is performed by MGI, an authorised service centre or
the Zip Navigator AT owner on approval. Replacement of parts
under warranty will not extend the warranty of the Zip Navigator
AT or parts.
10.0 Preventative Maintenance Program
To properly provide for the continued operation of your MGI Zip
Navigator AT, MGI has introduced its Preventative Maintenance
Program [PMP]. The PMP consists of work to be carried out by
both the owner and authorised service centres. To maintain the
warranty of your MGI Zip Navigator AT, it is essential that this work
is carried out. If the work carried out by the authorised service
centre is to replace parts that are part of the maintenance
schedule, the owner will be charged for the parts and labour. If
the work to be carried out is part of warranty, MGI will bear the
cost.
10.1 Cleaning Your Zip Navigator AT [See Maintenance Schedule]
For years of good operation, your Zip Navigator AT requires care
and attention:
• Keep your Zip Navigator AT clean by using a cloth with warm
water and a mild detergent.
• Do not hose down your Zip Navigator AT under any
circumstance, as the Zip Navigator AT has electronic
components.
• Ensure that the seat stem bracket is free from sand.
• Do not submerge your Zip Navigator AT in water as it will cause
irreparable damage.
• Clean the Zip Navigator AT battery base when the battery is
removed from the Zip Navigator AT.
10.2 Rear Wheel Axles Maintenance [See Maintenance Schedule]
The rear wheel stub axles need to be lubricated regularly. Remove
the rear wheels by depressing the spring clip and at the same
time pull off the wheel. Apply Petroleum Jelly or light grease to
the stub axles. Use a very small amount as the grease can attract
sand. If you play in sandy conditions you should clean the axle
and regrease fortnightly.
10.3 Upper and Lower Bag Strap Maintenance [See Maintenance
Schedule]
The bag straps should be replaced as per the Service Schedule.
The upper bag strap can be replaced by:
• Removing the left and right hand straps form the upper bag
support.
• Undo and remove the screws holding the strap in position on
the bag support.
• Remove and replace both bag straps.
• Insert bag strap securing screws.
10.4 Correcting the Alignment
Please see Zip Navigator All Terrain Motor Trimming at
www.mgigolf.com.
MGI Zip Navigator All Terrain
User Manual
19