31
normal temperature, moisture can form inside and damage electronic
circuit boards.
Do not use chemicals, cleaning solvents or detergents to clean the device.
Use a soft, clean, dry cloth to clean your top handle.
Rough handling can break internal boards and fine mechanics. Dropping the buggy on
its top box control housing can permanently damage the electronics and is not covered
under the terms of the limited warranty.
3.13
Charging and caring for your remote control lithium ion battery
There are two ways to charge the lithium ion battery inside the remote control.
Both methods connected to the remote control via the USB port on the base of the
unit:
AC World charger with USB cable (provided)
USB cord via the PC (provided)
DO NOT USE ANY OTHER CHARGERS
You can check the status of the remote battery capacity by going to Buggy Mode.
The “Nav On”
soft key will light up when charging. It is recommended to leave the
remote control on charge all the time when not in use. You cannot over charge the
lithium battery. If the remote control is not being used for extensive periods of time, you
may choose to take the unit off charge. It will require charging again prior to use.
