19
Please note MGI does not warrant any seat support brackets that are damaged or
bent.
2.10
Assembling the umbrella holder
Your buggy comes with an umbrella holder. The umbrella holder needs to be bolted into
position. Simply follow the pictures above. When not in use the umbrella holder can be
turned to its side. If you take your buggy home in your car, you may need to do that
prior to folding the buggy down. Your umbrella holder can be adjusted both to the side
and backwards and forwards.
The umbrella is secured inside the umbrella holder by tightening the plastic bolt located
near the top of the holder.
DO NOT LEAVE YOUR UMBRELLA UP IN THE UMBRELLA HOLDER IN WINDY
CONDITIONS.
If the wind catches the umbrella, it could cause your buggy to tip over and cause
damage, which will not be covered by warranty.
