background image

Warranty and Product Registration

Thank you for choosing MGE UPS SYSTEMS, INC. for your power protection, distribution, and quality
requirements. We are pleased to have you join our increasing family of users.

In order to maximize the value you receive from this product, and to ensure that you are kept informed of
product or software updates, we recommend that you take a few minutes to register your new purchase.
You may register online at the URL noted below. Should you not have Internet access, you may mail or fax
this form back (attn: Warranty Registration) as indicated at the bottom of the page.

Register your UPS at: http://www.mgeups.com/email/warranty/menu.htm

Please be prepared with the following information to register and validate your UPS warranty, keep
informed on software and product updates, and register your extension "W" if purchased with the
UPS.

User Information

Last name

________________________________________ 

First name

________________________________________

Company name

________________________________________

Address

________________________________________

Zip code

________________________________________

City

________________________________________

State/Province

________________________________________  

Country

________________________________________

Tel ________________________________________

Fax *  

________________________________________

Email*  

________________________________________

Product information 

Model

________________________________________

Serial Number

________________________________________ 

Date of purchase 

________________________________________   

Warranty Extension (W) not available on products

I have purchased a warranty extension (W) 

Reference: _____________________  Contract Number: _________________

Thank you from all of us at MGE.

MGE UPS SYSTEMS, INC., 1660 Scenic Avenue, Costa Mesa, CA 92626, USA

Tel: 714-557-1636                                                      Fax: 714-557-9788

41-000154-53  

Rev B00  9/2003

Summary of Contents for Galaxy 3000



























































Reviews: