manualshive.com logo in svg

MGE UPS Systems Galaxy 3000, Installation And User Manual, Page: 35 / 58

Share
Download
MGE UPS Systems Galaxy 3000 Installation And User Manual Download Page 35

Installation and User Manual

3.2.1

Screen Saver Display

When the Galaxy 3000 system has been in continuous operation, the operator interface will present a screen saver

display. See Figure 3-2.

The product name, "Galaxy 3000", will be moving around the display screen to provide an indication that the unit is

functional. See Figure 3-3.

Figure 3-3: Screen Saver Movement within the display indicates the unit is active.

3.2.2

Operational Summary Display

Pressing any of the keys will cause the unit to provide an operational summary display with the following informa-

tion. This display will quickly show the operator the time/date, the kVA load on all three phases, as well as the battery

level.

Figure 3-4: Operational Summary Display.

Operation

3 —5

86-172010-00 C05

Galaxy 3000

Galaxy 3000

Galaxy 3000

NORM Load Protected

02/19/2003     09:30

0.6    0.6   0.6

Battery

vo l t

KVA

Summary of Contents for Galaxy 3000



























































Reviews:

No comments