12 ‐Door operator TVR(FC) 5 / Rev 1.41
10. DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
Ovitor Oy
Sieni e 24
00760 Helsinki
Finland
Descrip on and iden fica on of the partly completed machinery:
Door operator TVR(FC) 5 with various limit and gear transmissions
The essen al requirements of EC Machinery Direc ve 2006/42/EC have been applied and fulfilled for the above men oned
machinery to be used with industrial doors, gates and barriers. The relevant technical documenta on has been compiled in
accordance with Annex VII, Part B of EC Machinery Direc ve 2006/42/EC.
In addi on the partly completed machinery is in conformity with the EC 2006/95/EC Low Voltage Direc ve LVD, 2004/108/
EC Electromagne c Compa bility EMC and 2002/95/EC the Restric on of the use of certain Hazardous Substances in Electri‐
cal and Electronic Equipment RoHS.
The above listed products are delivered according to the following standards to the extent to which they may be applicable:
EN ISO 12100:2010, EN 60204‐1+A1+AC, EN 60335‐1+A11+AC, EN‐55014‐1+A1, EN 61000‐3‐
2+A1+A2, EN 61000‐3‐3, EN 61000‐6‐2, EN61000‐6‐3+A1, EN 61439‐1, EN 61439‐3, EN 60529+A1,
EN 13241‐1+A1, EN 60335‐2‐103, EN 13241+A1, EN 12453, EN 12445, EN 12604, EN 12605, EN
12978+A1
SFS‐Inspecta Ser fioin OY has issued a cer ficate ascertaining that the manufacturer's quality system meets the require‐
ments of standard SFS‐EN ISO 9001:2008 and the general guidelines ABC 200, cer ficate 1229‐06.
We undertake, in response to a reasoned request, to supply it
in electronic form
to the market surveillance authori es with‐
in a reasonable period.
The party authorized to compile the technical documenta on is:
Ovitor Oy / Engineering Manager
Sieni e 24
00760 Helsinki
Finland
The devices are not intended to func on independently but as a part of an electrically operated machine. In the design, con‐
struc on and servicing of the machinery, it must be ensured that the loads to which the door mechanism is subjected do not
exceed the values given in the instruc on manual of the mechanism, and that the permi ed service life of a door mecha‐
nism is no more than 12 000 opera ng hours. As regards the installa on, se ngs and servicing of the machinery, the in‐
struc ons issued by us for the type of installa on in ques on must be observed.
The partly completed machinery must not be put into service un l the final machinery into which it is to be incorporated has
been declared in conformity with the provisions of the Machinery Direc ve.
Helsinki, 14th of September 2016
_______________
Juha‐Ma Lyhykäinen
Produc on Manager
Ovitor Oy
