C
ompressed-air Stapling Plier
Z 23 P
Page:
13
Mod.:
01/2022
ET
Seite 13 von 34 31.01.22 P:\Technik\ZANGEN\Z 23 P\Bedienungsanleitung\Englisch\Manual Z 23 P Pneum en_01_2022.docx
11.3
Product features
The stapling device has the following features:
Trigger safety
Contact trigger
Magazine with top-loader system
Adjustable air discharge 360°
Adjustable drive depth with bottom retaining clip
11.4
Safety equipment
Trigger safety
The stapling device is equipped with a trigger safety at the discharge opening. The trigger is
enabled only when the trigger safety is pressed.
WARNING
Severe injury if the stapling device is operated with a defective or bypassed
trigger safety.
Use the stapling device only with a functioning trigger safety.
Actuate the stapling device only when the tip of the tool is pressed firmly
against the workpiece.
Warning labels on the stapling device
For the trigger setting, “Trigger repeat,” the following types of use are not permissible:
Work that requires moving across scaffolding, stairs, ladders, or ladder-like structures.
Use to close crates or boxes or to attach transport locks.
The appropriate warning symbol (see below) is applied to the front side of the
stapling device.
Rating plate
Triangle pointing downward (This triangle indicates that you are only permitted
to use the device if the trigger safety is functional)
11.5
Warning labels on the stapling device
Rating plate
Triangle pointing downward (This triangle indicates that you are only permitted to use the
device if the trigger safety is functional.)
