C
ompressed-air Stapling Plier
Z 23 P
Page:
17
Mod.:
01/2022
ET
Seite 17 von 34 31.01.22 P:\Technik\ZANGEN\Z 23 P\Bedienungsanleitung\Englisch\Manual Z 23 P Pneum en_01_2022.docx
Slide the quick-connect lock (1) on the compressed air hose onto the connector (2) until it
audibly engages.
Check the operating pressure at the pressure gage on the compressor.
The maximum permissible operating pressure is 8 bar.
WARNING
Risk of explosion if maximum operating pressure is exceeded.
In this case, disconnect the air hose from the stapling device immediately.
13
Stapling device operation
13.1
Open the magazin
To open the magazine, slide the
slider (1) back in the direction of the
arrow until it engages with the
locking pin (4).
