31
Model:
Netti Dynamic AdaptPro
Language:
English
Version:
2021-11
My-Netti.com
5.5.3 BACK EXTENDER
The back height of Netti Dynamic AdaptPro is
510mm measured from the seat plate to the top
of the back Velcro. For users taller than ca 1.85 m
it may be advantageous to have a higher back for
better support around the shoulder region.
Netti Dynamic AdaptPro is prepared for back
extender allowing for increasing of the back height
with up to 115 mm. To be ordered as accessory.
The back extender is mounted by fixing the back
extender profiles to the inner side of the chair back
tubes with 2 pcs screws on each side.
Back extender height adjustment:
• loosen the screws slightly and slide the extender
profiles up to desired height, tighten well.
1 pc 5 mm Allen key
5.6. ASSESSMENT AND CHOICE OF
DYNAMIC BACK SUPPORT CYLINDER.
The chair back position is defined by the chair
back cylinder. There are different type of cylinder
available for the Netti Dynamic System:
