72
My-Netti.com
Model:
Netti Dynamic AdaptPro
Language:
English
Version:
2021-11
11. TROUBLESHOOTING
Symptom
Reason / Action
Reference
in manual
The wheelchair is
going askew
• The angle of the bearing house might not be 90°.
• Check that the front castors are fitted in the same height.
• The main wheel hubs might be incorrectly mounted.
• One of the brakes might be too tight.
• The user are sitting very askew in the chair
• The user might be stronger on one side than the other.
5.3.2
5.3.3
5.3.4
5.3.5
The wheelchair
is heavy to
manoeuvre
• The main wheel hubs might be incorrectly mounted.
• Clean the front castors and forks for dirt.
• Too much weight over the front castors
(Adjust the point of balance by moving the main wheels back).
5.3.2
5.3.3
The wheelchair is
hard to turn
• Control that the front castors are not fixed too tight.
• Adjust the angle of the bearing house.
• Too much weight over the front castors adjust the point of
balance.
5.3.3
5.3.4
The front castors
are wobbling
• The front castors are not fixed properly.
• Check that the front forks are fitted in the same height.
• The angle of the bearing house might not be 90°.
• Too much weight over the front castors adjust the point of
balance.
5.3.2
5.3.3
5.3.4
The main wheels
are difficult to
take off and put
on
• Clean and grease the quick release.
• Adjust the length of the hub bushing.
5.3.6
The brakes are
not functioning
well
• Adjust the drum brake.
5.3.7
The wheelchair
feels ”shaky”
• Check screws and adjustment points in general.
Please contact your dealer for information about authorized service facilities
that can give support if solution is not reached in this form.
When in need of spare parts, please contact your dealer.
When making changes affecting frame construction, contact dealer /
manufacturer for confirmation.
