21
Model:
Netti Dynamic AdaptPro
Language:
English
Version:
2021-11
My-Netti.com
The relationship between seat angle and
backrest angle should be kept constant when the tilt
function is used to create variation for the user.
•
Seat height is to be seen together with the leg
supports and with the wheel positions.
•
Leg supports need to be adjusted to
accommodate the seat height.
Please note: the Netti Dynamic System leg
support adjustments are described in detail in
chapter 10.
Please, see the drawings on next page
regarding seat depth adjustments.
5.3 WHEELS ASSEMBLING
5.3.1 DRIVE WHEELS
To mount the drive wheel remove the quick
release bolt from the hub bushing, lead it
through the centre of the main wheel and
into the hub bushing while pressing the
knob in centre of the quick release.
To check that the drive wheel is properly
attached to the hub, remove the finger from
the central knob and pull the main wheel.
If the drive wheel does not lock, see chapter
5.3.6 and adjust. If it still does not lock, do not
use the wheelchair but contact your dealer.
S
and and sea water (salt used for gritting in the
winter) can damage the bearings of the main
wheels. Clean the wheelchair thoroughly after
exposure.
There are following wheels available: 16” and 24”.
Choice of main wheel size and position in the wheel
bracket allows for driving characteristics - self drive
or attendant drive and seat height adjustments.
Both 24” wheels and16” wheels have drum brake.
Choice of wheel size and position requires
adjustments of the front castor stem angle.
