Meyra FX One 1.150 Operating Manual Download Page 3

Page: 3 / 56

Seat .............................................................................................................. 19

Seat belt .........................................................................................................19

Adjusting the seat depth ..............................................................................19

Adjustment of seat inclination ....................................................................19

Adjusting the seat height .............................................................................20

Back support ............................................................................................... 21

Folding over the back support .....................................................................21

Folding up the back support ........................................................................21

Fitting the back belt .....................................................................................22

Adjusting the back support angle ...............................................................23

Wheels ......................................................................................................... 24

Drive wheels .......................................................................................................24

Quick release axle .........................................................................................24

Handrims ........................................................................................................25

Spoke guard ..................................................................................................26

Steering wheels ..................................................................................................26

Steering wheel position ................................................................................26

Centre of gravity ................................................................................................27

Wheel camber .....................................................................................................28

Adjusting the wheel camber ........................................................................28

Toe-in ...................................................................................................................29

Set toe-in with attached drive wheels ........................................................29

Fine adjustment ............................................................................................29

Seat belt ...................................................................................................... 30

Fastening the seatbelt with buckle .............................................................30

Adjustment of belt length ...........................................................................30

Support castor ............................................................................................ 31

Swinging the support castors .......................................................................31

Summary of Contents for FX One 1.150

























































Search results

Summary of Contents for FX One 1.150

Reviews:

Related manuals for FX One 1.150

Brands by name

Popular brands

Meyra FX One 1.150, Operating Manual

Search results

Summary of Contents for FX One 1.150

Reviews:

Related manuals for FX One 1.150

Brands by name

Popular brands