1
2
3
4
19
SEAT
Seat belt
The seatbelt (1) is screwed onto the
seat tubes.
Adjusting the seat depth
!
Attention:
If an adjustment of the seat depth
is necessary contact your specialist
dealer.
Adjustment of seat inclination
The seat can be adjusted in angle.
– Loosen the clamping screw (2) as
well as the screw (3) on each side.
– Disassemble the screwed connec-
tion (4) on each side.
– Position the vertical support tube
parallel on each side according to
the desired angle.
– Reassemble the screwed connec-
tion (4) on each side.
– Retighten the screws (3) as well
as the clamping screw (2) on each
side.
☞
Note:
It might be required to adjust the
angle of the back support after
such an adjustment, view chapter
< Adjusting the angle of the back
support >.
Summary of Contents for FX One 1.150
Page 1: ...GB We move people OPERATING MANUAL ACTIVE WHEELCHAIR FX ONE Model 1 150...
Page 51: ...51 NOTES...
Page 52: ...52 NOTES...
Page 53: ...53 NOTES...
