3
24
WHEELS
Drive wheels
The driving wheels can be removed
and reassembled without any tools.
No person may be seated in the wheel-
chair during assembly or removal. The
wheelchair must stand on a level and
fi rm surface. Before starting the dis-
assembly work, support the frame to
prevent the wheelchair from tipping
over and secure it to prevent an un-
wanted movement or tipping over.
Quick release axle
– Push in the stop button in the cen-
tre of the wheel hub (1).
– Remove or attach drive wheel.
!
Attention:
After inserting the drive wheel the
locking button must stick a couple
of millimetres out of the wheel
nut.
• The drive wheel is then secured in
position.
☞
Note:
☞
The locking bolt is to be kept clean.
A functional fault may occur in the
case of contamination due to sand
or earth or in the event of freezing
of moist cold air.
☞
Note:
Always carry out a tensile test after
each assembly!
Summary of Contents for FX One 1.150
Page 1: ...GB We move people OPERATING MANUAL ACTIVE WHEELCHAIR FX ONE Model 1 150...
Page 51: ...51 NOTES...
Page 52: ...52 NOTES...
Page 53: ...53 NOTES...
